IP65 Recessed Pergola Spotlight Kit — 3W Ra98 CCT 2700-6500K Dimmable

IP65 Recessed Pergola Spotlight Kit — 3W Ra98 CCT 2700-6500K Dimmable

6-Pack Kit / Black
$89.90 USD
Precio de oferta  $89.90 USD Precio habitual  $128.43 USD
Ir directamente a la información del producto
IP65 Recessed Pergola Spotlight Kit — 3W Ra98 CCT 2700-6500K Dimmable
1/9
IP65 Recessed Pergola Spotlight Kit — 3W Ra98 CCT 2700-6500K Dimmable
$89.90 USD
Precio de oferta  $89.90 USD Precio habitual  $128.43 USD

Recessed spots that drop into the beams you already have — no wiring to each fixture.

The LRLEDS IP65 Recessed Pergola Spotlight Kit is built for timber and aluminium beams: drill a 27 mm hole, clip the spotlight in with its stainless springs, then run the 24V cable back to one IP67 SELV driver and one IP67 RF controller. Every joint is a waterproof push connection — nothing to strip, nothing to seal by hand.

Made for pergolas, carports and verandas

  • IP65 sealed spotlights — D36 × H26 mm body, 27 mm cutout, matte 30° lens for clean accent pools instead of glare
  • IP67 potted driver and controller — internally potted for humid outdoor use, SELV low voltage
  • 24V DC throughout — safer around family and pets than mains-voltage spots
  • Waterproof push connectors — 1-to-6 or 1-to-10 Y-splitter with pre-terminated 24AWG leads; end caps supplied

Light you can tune

  • CCT adjustable 2700K–6500K — 5 preset steps, plus continuous fine-tuning with a long press
  • 4096-level dimming, 1–100% — flicker-free (PWM 2000Hz, linear curve)
  • Brightness presets 10 / 25 / 50 / 75 / 100% plus scene memory
  • CRI Ra98 — timber, stone and planting keep their real colour after dark

What's in the box

  • 6 or 10 × LED recessed spotlights (3W, 120 lm each, 24V, IP65)
  • 1 × IP67 Power supply with EU plug cord (40W)
  • 1 × IP67 potted 2-channel CCT RF controller (V2-PWM, 4096-level)
  • 1 × RV2 RF remote (2-zone, CR2032 included, magnetic back + wall holder)
  • 1 × 1-to-6 / 1-to-10 Y-splitter, 40 cm
  • 6 or 10 × extension cables (24AWG, 5 m / 10 m)
  • 3 × end caps and manual

Specifications

Model LR2-IP65CCT3W
Waterproof rating IP65 (spotlights) · IP67 (driver & controller) · IP20 (remote)
LED 3W per spotlight · 120 lm · 24V
Colour temperature CCT adjustable 2700K–6500K
Dimming 4096 levels, 1–100%, flicker-free (PWM 2000Hz)
CRI Ra98
Beam angle 30° matte lens
Spotlight size / cutout D36 × H26 mm / 27 mm
Power supply AC170–265V → DC24V, 50/60Hz, EU plug · 40W , IP67 SELV
Controller V2-PWM, 2-channel constant voltage, 3A per channel, 144W @ 24V, IP67 potted
Remote RV2 2.4G RF, 2-zone, 30 m open space, L156 × W48 × H22 mm, CR2032
Extension cable 24AWG, 5 m 
Operating temperature −30 °C to +50 °C
Finish options Black / Silver

Good to know

  • The spotlights, driver and controller are rated for outdoor use — please keep the remote in a dry indoor location (it ships with a magnetic back and a wall holder).
  • Recesses into timber or aluminium beams using the 27 mm cutout; 3 end caps are included for unused splitter outputs.
  • The controller and remote carry a 5-year warranty per the manufacturer manual.
  • Certification listed for the controller and remote: CE, RoHS (EN 61347-1/-2, EN 62493, EN IEC 55015, EN IEC 61547, ETSI EN 301 489-1/-3, ETSI EN 300 440).
Pack Size
Finish

You may also like